Nice! Live that bus and the printing is very interesting! Sublimation is a great GF partner!
4 Likes
Those are some great sublimation results. I sublimate onto acrylic a lot and have tried different processes.
This first image is sublimated on the top of white acrylic.
This next one is printed on the back of clear then painted with white Rustoleum spray.
This one was first engraved on the back and then sublimated on the back over the engrave.
The last one, the flag was sublimated on the back, the text was engraved on the front (masked) then spray painted white on back, spray panted black on text and masking removed.
17 Likes
These all look amazing!
6 Likes
Thanks for sharing your process. These are great!
6 Likes
These look great. I was toying with the idea of printing and engraving on clear acrylic for some of the lighted one to see how they look.
6 Likes
Thank you. I haven’t tried back lighting yet. I have a “Dark Side of the Moon” that I have been trying to find translucent colors to complete. I may break down and just try dyeing some resin to see if it works.
7 Likes
Thank you.
3 Likes
This thread has detoured such that I want to bring up another printing on plastic topic…
One thing I am interested in doing is creating reproductions of the flat plastic parts in pinball machines. They often break and for old games, old stock is hard to get. Reproductions are made for some games, but it’s common to need one part, not a whole set… So I want to make them myself.
However, these plastics are not easy to make with home tech like inkjet or even sublimation… I think.
Here is an example… A clear plastic, with partial-coverage art, printed on the back. And you can see some of the artwork is white. In fact, all of it is backed with white. The white ink looks opaque to the eye, but it does let light pass, so the lights underneath light up the whole piece and show off the colors.
Pieces which have complete art coverage, as you can see here, have a full white backing.
For a piece that has total coverage, maybe you can sublimate the colors onto the plastic, and then use some kind of spray for the backing white layer. But I am not sure how to do something like the first piece.
I’d be curious if y’all have any ideas.
(AFAIK, the right way to do this is a stupid expensive printer that can print white.)
4 Likes
For the full coverage ones, you would just need to use white acrylic and print on the one side, no need to add a white spray to the back.
For the first one, maybe try masking the bottom side of a clear acrylic and engraving the design, spray the engraved part with white, then sublimate the color design on the top. I am thinking, if you engrave the back, you may not have to spray the engrave since the engraving comes out white. It depends on white itself. The hard part would be placing the print on the piece exactly over the engraved part. I might have to do some test this week with this method.
2 Likes
White acrylic is not translucent enough to pass enough light, it would look dim. Also, all of these are printed on clear plastics with the art underneath. Art on top plus dim would stick out like a sore thumb.
There is a very specific look to make this right.
Light engrave to accept the white, the sub on top… That’s a good idea, thanks!
3 Likes
I wonder if you print on the back side of clear acrylic and then use white India ink over that? Or if you used diluted white acrylic paint?
Or if you did a layer of acrylic behind it - like white acrylic or maybe frosted clear acrylic?
Just random ideas that came to mind.
2 Likes
Do you do any airbrushing? You can buy translucent white airbrush paint at Hobby Lobby. Createx makes a range of transparent, opaque and pearlized paints that would probably work quite well in your restoration. I have used their paints for a lot of projects and they go on quite smoothly.
3 Likes
I actually do have an airbrush, though I can barely use the darn thing. Good idea, thank you!
5 Likes
These are great! I’m only a few months in on sublimation, but I have a mountain of acrylic that will now need to be included. Thank you for sharing your work and information!
7 Likes
I just tested out the engrave on the back. The engrave definitely helps. These pics were right after engraving, cutting and printing, so they are not super cleaned up pieces and no finish has been added.
Top picture of the non engraved (left) & engraved back (right)
Picture of the back of both.
Picture of each on a black background after printing.
Picture of each with part black and white background to better see the results.
7 Likes
Wow, the engraved on the back definitely turned out much brighter colors didn’t it? Looks great. I just may have to break down and by a sublimation printer. Which means I’ll really have to clean my craft area so I have room for it…
4 Likes
Very interesting, thank you!!
Do it! 
I wish I could find a sublimation forum that is as good as this one is for the 
though.
2 Likes
Dang these look so good! Good job.
1 Like
If it’s anything like mine, that will last all of 5 minutes😂
4 Likes