If anyone has a PRO model and can give me accurate measurements of the glass for the lid I would appreciate it. Please include measurements of the camera placement. My lid exploded after the hinge popped off of the glass yesterday. Glowforge says its unrepairable and wants to sell me a refurbished machine. I can get a piece of tempered glass for $70. Figured its worth a shot to try the repair myself.
Hi! Welcome to the forum.
Iām pretty sure the only difference between the Pro and the basic is a higher wattage tube and the addition of the cooler in the Pro, the cases and lids are identical with the exception of the pass-through. These are measurements from my basic.
Standing in front of the machine, the glass is 23, 1/8 wide, by 20, 1/16 deep. The camera sits 12, 5/16 from the hinge edge of the glass to the centerline of the camera, 11, 1/2 from the left edge, and 11 5/16 from the right edge to the camera centerline.
Hopefully someone with a pro will verify that.
7 Likes
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.