Custom Inkscape, Illustrator, CorelDraw and Affinity Designer Color Palettes for ordering operations in GFUI

It is even more complex for us mac users, had to dig into the package contents, and copy one of the existing files and paste the new information into that file.
Making a .txt file on my mac, well I do not have an app that will do that, even the text edit app wanted to make it a .rtf file, Inkscape doesn’t like that.
For you Mac users, right click on the Inkscape app icon in finder and choose show package contents, on my machine the file is located in

/Applications/ (place the file here)

I cannot link the gpl file to the board, so if any other Mac user wants the file send me an email and I will send it to you.


The Mac text editor will save plain text files, and can can default to them. Or you can install TextWrangler for free. :wink:


Is the mac text editor a developer tool? I did a search for it on my computer and do not have it.
All I have TextEdit and it will not save plain text files.
I will try the TextWrangler, thanks.

TextEdit will in fact save plain text files. You just have to make sure there is no formatting in the document. Go to Format… and choose Make Plain Text, then Save will allow you to save as .txt.


I just recreated the same thing for Illustrator. Thanks for the data @marmak3261! Here is the swatches file: (85.7 KB)

Here’s where I think it goes on a Mac (sorry Windows users, I don’t have a machine to test but I’m sure smart folks out there will figure out where to put it); I’m using Illustrator CS5 on Mac OS 10.10.5 so your procedure might be different:

  1. Save the file to your hard drive.
  2. In the Finder, hold down the Option key while choosing the Go menu. Choose Library (it doesn’t show up if you are not holding down the Option key).
  3. Navigate to Library > Application Support > Adobe > Adobe Illustrator CS5 > en_US > Swatches
  4. Drag the file into the above Swatches folder.
  5. Restart Illustrator. If you go to Window > Swatch Libraries > User Defined, you should see the Glowforge swatch library in there.

Thanks @marmak3261! I just used your post to create a CorelDRAW version. I guess @cynd11 and I think alike. (428 Bytes)

EDIT: To use this palette, download the zip file and extracted the contents. Copy the glowforge.xml file to My Documents\My Palettes (this file should already exist even though you don’t have any custom palettes). Then, in CorelDRAW, open the Color Palette Manager (Window --> Dockers --> Color Palette Manager), open the My Palettes section, and double clicked on the Glowforge palette.


Way to jump in @cynd11 and @johnwills! Good collaboration here!


@johnwills, where do we put the file in Corel Draw? :confused:

When I created the palette, it defaulted to saving in a folder called “My Palettes” within My Documents. I’d try putting it there. Create the folder if it doesn’t exist. Then, in CorelDRAW, open the color palette manager (Window --> Dockers --> Color Palette Manager). From within the Color Palette Manager, choose the icon across the top for Open a Palette and then navigate to where you saved this file. If that doesn’t work, let me know. I need to move this palette from my desktop computer where I created it onto my notebook computer later today. I’ll try to follow these steps. If they don’t work, I’ll update this.


Actually, it’s slightly easier than I described. I just loaded it on my notebook. I downloaded the zip file and extracted the contents. I copied the glowforge.xml file to My Documents\My Palettes (this file existed even though I didn’t previously have any custom palettes). I then looked in the My Palettes section of the Color Palette Manager and double clicked on the Glowforge palette.


SO I can help out with the mac.

no need for a text editor.
copy the text provided by @marmak3261 in the first post. select and press command-C usually
open a terminal window
at the prompt type:
cat > /Applications/
press return if you did not
press command-V to paste or select paste from the edit menu
press control-D to close the file
you can close the terminal window now

I would reccomend doing this while inkscape is closed.
you can use any name you want ending .gpl if you don’t like GFPalette.gpl.

The > is of course very important in the cat command if you are having trouble since it tell the bash shell to write to the file named after.
If you have a permission problem you can try the sudo in front of the cat command. it will prompt you for your password and then should be able to write where you normally cannot even places you probably shouldn’t.

I unfortunately cannot reboot at the moment to finish the XQuartz install to test this beyond getting a text file out there. so if anyone else cares to verify that this is successful and I didn’t miss anything I suspect others would be appreciative.


Custom Palette for Affinity Designer (367 Bytes)

Unzip the file
For Windows workstations, copy/move Glowforge.csv to c:\Program Files\Affinity\Affinity Designer\Resources\Pantone\

You will probably need to give administrator approval to copy the file to this location.

For MAC workstations, hopefully the instructions are recognizably similar


CLI rocks! so much easier!

Also for Inkscape users: As the tool tip states on the palette ribbon, clicking on the palette sets the fill color by default. You need to press Shift+click on the swatch to set the stroke.

1 Like

Yep, looks like it’s pretty much identical. Here’s a screenshot including the file path.


That is so awesome, thank you so much. I was literally about whether the colors derived the order of operations yesterday.

These instructions will work for Linux as well. The one change will be the part after “cat >”. For my version of Ubuntu, “cat > ~/.config/inkscape/pallettes/GFPallette.gpl” should work.

Open Inkscape and press “shift + ctrl + p” and see where “user config:” points to and add “/pallettes/GFPallette.gpl” after that. BTW, “The ~ (tilde character) shorthand command refers to that particular user’s home directory.” -source: Wikipedia

Or, use any of the kajillion Linux editors that can save plain text files.


I just wanted to bump this thread up to the top now that people are taking their deliveries.

This is good info for streamlining artwork into the GFUI and didn’t want it being forgotten!


Thank you. I was getting ready to go looking for this again


Yes, this is a very helpful and important concept for everyone. It works on engraving, cutting and scoring. So each object in your design with a different color gets imported into the GFUI as its own separate operation. So a red filled square and a blue filled square will be different operations that you set for different engraving settings. A red outlined square and a blue outlined square with appear as different operations for cutting. I’ve noted that some folks are still grappling with this concept.


I made an updated Affinity Designer color palette that doesn’t require you to dive into the application package contents and doesn’t require administrative privileges. I also assume this would work on (1.0 KB)

See the image below for where in import the Glowforge.afpalette file. The button is a little small, but you want the small menu button to the right of the brushes tab.

Also, if you import it as a System Palette, it works across your Mac in other applications as well.