We had some amazing neighbors down the block who unfortunately left Hawai`i, and they gave their Betta fish to my daughter.
When she went to school we wouldnât know if the fish ate that day, and the fish also needed 1 day a week where you didnât feed it. (too much to keep track of)
So I picked up an ESP32-s3 board
https://www.amazon.com/dp/B0BRTT727Z
And coded it with chatgpt, back and forth and put it into arduino:
Here is the code:
fishometer.txt.zip (4.6 KB)
With these settings in the Arduino App:
Set the Tools menu like this, top to bottom:
- Board:
ESP32S3 Dev Module - Port: select the current
/dev/cu.usbmodem...port for the board - USB CDC On Boot:
Enabled - CPU Frequency:
240MHz (WiFi) - Core Debug Level:
None - USB DFU On Boot:
Disabled - Erase All Flash Before Sketch Upload:
Disabled - Events Run On:
Core 1 - Flash Mode:
QIO 80MHz - Flash Size:
16MB (128Mb) - JTAG Adapter:
Disabled - Arduino Runs On:
Core 1 - USB Firmware MSC On Boot:
Disabled - Partition Scheme:
16M Flash (3MB APP/9.9MB FATFS) - PSRAM:
OPI PSRAM - Upload Mode:
UART0 / Hardware CDC - Upload Speed:
921600 - USB Mode:
Hardware CDC and JTAG - Zigbee Mode:
Disabled
Just be sure to update your wifi info in the text file if you are doing this.
const char* WIFI_SSID = âYOUR_WIFI_NAMEâ;
const char* WIFI_PASSWORD = âYOUR_WIFI_PASSWORDâ;
(wifi because it sets the time / date from the internet, so it knows when to reset every day)
It is currently coded to turn the screen off at I think 8pm which is the kids bedtime, (the fish needs to sleep also) and turns on at 5am.
It works great, but you needed to press the little button on the screen which wasnât satisfying.
So I picked up a pack of low profile 30mm arcade buttons. (I wanted low profile concave, but no luck finding them)
https://www.amazon.com/OBSF-30-Bright-Tournament-Joystick-Compatible/dp/B005BZ3Y8Y/
(I got the buttons from aliexpress, the price from amazon was too high, aliexpress was a few bucks, but I canât find the link) (this is what I really got below)
And wired it to ground and GPIO43
Then of course needed to design a little box for the button:
Here is the SVG for the button box, just incase you need to make one also.
fishbutton.svg.zip (11.1 KB)
Now I need to make one for my morning medication, because it is so fun to press the button.
And one for the dog food. ![]()
Oh, and on friday⌠it is Fish Fast Friday⌠hehe
And the boot up screen. ![]()
Have fun!!!
~ Aloha











