Engraved foods

food
projectinspo
#11

That makes sense, though it does kind of suck. I was thinking “but in the video…” and then I re-watched it and the chocolate star ships and plastic invitations were made on machines in different locations (inferring different machines in the same house).

0 Likes

#12

Wouldn’t put much stock in the original marketing video. Though it appears to be accurate as to what the Glowforge is capable, the units used were all very, very, early prototypes. The people were actors, motions staged, etc. The plastics were not final although they appear to be close. Don’t misunderstand it does not appear anything in the video was intended to mislead or is noticeably incorrect, just that it was a marketing video intended to show what the Glowforge WILL do. It does make sense that you don’t want to eat something that may be laying in a previously deposited toxic dust.

3 Likes

#13

I have minimal experience with food cutting. But that experience has been universally disgusting.

One of my students used our laser cutter to slice his pizza, because the Pizza Hut guys failed to cut all the way through.

My office was nearly inhabitable, and his pizza tasted like tar.

I assume if you get temperatures EXACTLY right, you can merely cook the food and it is fine. But except for very thin sheets, I doubt you can cut anything and still consider it tasty afterward. But I could easily be wrong.

1 Like

National Donut Day(US & Canada)
#14

I’m thinking graham crackers would be fun and the high sugar content would caramelize nicely.

0 Likes

#15

Out of an abundance of safety, the chocolate rocket the girl in the marketing video put in her mouth was actually cast from a laser-cut acrylic mold lined with plastic wrap, so the chocolate never touched anything laser-made directly. But the chocorockets were laser cut, although the settings and chocolate formulation took a week to get dialed in!

0 Likes

Cutting chocolate
Anyone have a comparison with $366 ebay laser (40W CO2)?
Will The GF Take Vector And Rastor in one file?
#16

Is chocolate going to be one of the materials you sell? Frosting barcode? :wink:

3 Likes

QOTD from Glowforge: What Proofgrade materials do you want?
#17

We’ve thought about it!

3 Likes

QOTD from Glowforge: What Proofgrade materials do you want?
#18

I’ve now found a food use for my Glowforge http://mashable.com/2016/01/08/pizza-cutting-science/?utm_cid=mash-com-fb-main-link#DeTkRFxRksqB

5 Likes

#19

I’ll make the pizza!

12 Likes

#20

Wish I could make one of those on a Glowforge.

I don’t understand why those slices are better than triangles, though…

0 Likes

#21

Eat the outer ring first, keeping the center intact and warm?

0 Likes

#22

outer pieces for crust lovers, inner for those other people.

0 Likes

#23

:astonished: Did you make the Pizza Oven yourself?

0 Likes

#24

Yes. It’s s beast.

0 Likes

#25

From The Bread Builders book, or another source?

0 Likes

#26

I’m looking to build one, eventually. But that is several years and a different house away :frowning: . I need a much bigger backyard than I currently have.

0 Likes

#27

mother of god…
I would have pizza every day. what else do you cook in there?

1 Like

#28

That is amazing- I’m so jealous!! My stove is terrible at cooking pizzas- can’t get the bottom to brown nicely no matter what. Maybe this will be a future project…:wink:

0 Likes

#29

Rado Hand’s plans but highly customized for a bigger oven. Couldn’t have done it without Rado! I had always wanted an oven since I lived in Italy but looking at the Bread Builders pushed me forward with building. After assisting on two ovens with some other folks, I focused on my own. Sketchup was essential because I was using mostly recycled blocks and bricks with some custom sizes. The floor is 36 by 48 with a 16" barrel dome. Here is a full frontal but the doors are inside out before I

put the wrought iron hinges on.

7 Likes

Show and Tell
#30

I think you meant to post this link. I built a base for one, it’s there in the backyard, but I have yet to complete the oven. I have the materials stockpiled (except a hearth stone), just not an oven.

0 Likes