International Shipping Latest

Updated 4/2/2020

All Glowforge Pre-Orders Now Shipping

Shipment notifications are complete for all Glowforge pre-orders around the world, including Glowforge Printers and Glowforge Air Filters. Some of you have been waiting since the very beginning, and we can’t thank you enough for your patience. Please share pictures as you start printing – I’m sure it’s hard to believe, but we’re just as excited for you to create as you are!

If you have an international pre-order and didn’t receive the email asking for your address to accept shipment, please go to https://glowforge.com/shipping 66 to confirm your shipment. If you are awaiting your Air Filter and didn’t receive an email, please send a note to support@glowforge.com, and we’ll send you a link you can use to confirm your delivery.

Proofgrade Now Available in Canada and the EU

Customers in Canada and across the European Union now have access shop.glowforge.com 24! We’re continuing to work to open the shop in additional countries.

If you have credit, here’s how to use it. Log in, select items to add them to your cart, and then click the link near the top of the page that says “You’ve got credits on file! Click here and we’ll email them to you as a gift card.”

One more thing: for all international customers who have Founders Discounts and don’t have shop access yet, we’ll extend your discount to make sure you can make use of it.

Design Catalog Available

Finally, the design catalog is now available for customers everywhere. Have a look at https://shop.glowforge.com/collections/designs/ 12.

12 Likes

Hi dan, one question how is that you need to get inspection in Guadalajara to get the glowforge to Canada (and I think Mexico too)? The factory in Guadalajara is making the glowforge? also if that is true, how is that for Mexico is not moving one month is moving almost three! :frowning: :weary:

Please explain why my forecast has jumped another 5 MONTHS then? (Canada) My newest date is February 2019! I cannot understand why this company cannot comply with international requirements in 3 years?

8 Likes

I’m in Canada and my date move 4 months, super disappointing :sob:

1 Like

Hi Katie - thanks for commenting - can you check your date again? We just noticed a typo in our Canada dates and fixed.

3 Likes

Thanks for the correction! November looks much better than February. Let’s hope it’s a more firm date finally.

2 Likes

November 1st now, Thanks Bailey :slight_smile:

1 Like

So is the Glowforge now made in Mexico? I was under the impression it was being made in the US.

1 Like

Hi Dan
Is the delivery date for the Pro Version still October for Australia
Steve

WTF!
The latest forcast states February 1st for the unit and March 31st for the air filter to ship to Saudi Arabia.

Either, you guys are doing nothing about it or this is really a rocket-science process that requires years to complete!!

I am really disappointed and puzzled!!!

Will Canadians be able to order proofgrade materials when Canadian shipments do go out? I know there are EU people who can’t take advantage of the proofgrade stuff yet

We’re setting up a line with Flex in Mexico where we’re manufacturing the air filter (this was in the last update). Printers that are being sold now are assembled in the US, and we’re working with both factories to figure out how best to produce for the world market going forward.

1 Like

We haven’t shared any estimates for international Proofgrade shipments yet.

You can see the most accurate forecast for your shipment to your country at glowforge.com/account.

It would be really nice to see a forecast on the account page that says when we can expect to be able to order proofgrade materials.
I know I’ve done lots of ordering of woods and acrylic from over the border and its usually pretty painless. I can see why it would be slightly more troublesome for those overseas though

2 Likes

I’ve made a lot of noise saying we want more information about delays and this is more information, thank you.

I see a reason behind a bit more time, and I can believe Canada would be like that… I blame Canada :wink:

6 Likes

I seem to remember that with each delay, we get more freebies. Can someone refresh my memory as what they were? And will we be (Canadians) able to use them? Thanks!

1 Like

considering i paid in October 2015, my delivery date is now moved out to January 2019. All i can say is what a disappointment glowforge is. Such a pity I could have invested my money in something else and purchased a glowforge in 2019 for basically the same price, Disappointment does not even actually begin to cover it. Lets see that date move out again, I would not be surprised

10 Likes

Hi Dan,

What assistance do you need for Australia? I ship items all over the country and import goods also. We have specialised 3rd party custom officers/companies that can assist with compliance for electronic and bulky goods when bringing into the country.

I trust you know this, but I would like to help in anyway possible, as moving my PRO model AUS delivery date from 15th October to now January 2019 is a little upsetting.

Kind Regards,

Pete

18 Likes

The delivery date for my Pro (to Perth, Aus) just got bumped back from Oct 15 to Jan 15 :sob: though to be honest I had a sneaking suspicion the date would change again. If I hadn’t gotten a bunch of referrals I probably would have looked to get my money back by now… I could have been saving a sizable chunk of interest off my mortgage!