Poker Player Chip, Champion Plaque, Final Table 4” Chip VFW



40 Likes

Cute. I’ve made a few β€œcard cover” chip designs and given them away at tournaments. Just for fun, which is what you do with a laser. :grin:

9 Likes

Pretty sweet!

6 Likes

Those turned out very classy!

7 Likes

Nice!

4 Likes

very nice

3 Likes

Thank you

These are great! Players will be wowed!

2 Likes

They turned out really nice. It’s fun to be able to make things for special events.

3 Likes

You are right they really liked them. I was lucky.

1 Like

Player. Chips. Baltic Birch 1/4” used basswood setting. Player chips Stained and masked prior. 535/70/270 1 pass

4 inch rounds for players at final table Baltic Birch lightly sanded prior to engrave. 535/70/270 for text, 535/80/270 for center artwork. 1 pass. 3 coats lacquer spray finish on face and 2 coats on back. (Rust oleum clear lacquer)

Champion 10” plaque lightly sanded, 1/4” Baltic birch setting for basswood masked and engraved. 535/70/270 text, 535/80/270 center artwork 1 pass. Finished with rustoleum clear lacquer 4 coats on face and 2 coats on the back.

2 Likes

nice, thank you for the deets!

1 Like