Problem with the GO Button

[Mckinzy]

Hi,

I think there is a piece of debri stuck down around the button on the top right?

Any idea on how to get it out without damaging it?

[rbtdanforth]

A vacuum cleaner?

[jbmanning5]

Compressed air?

[rpegg]

Lift it upside down over your head and shake violently. Come on, you can do it.

[mnemosyne]

also has the benefit of clearing all your designs from the print screen!

[Jules]

Shouldn’t be laughing at that.

[rbtdanforth]

@rpegg

Lift it upside down over your head and shake violently

First be sure that all the Orange bits are in place so you don’t void the Warranty

[timjedwards]

@mnemosyne

clearing all your designs

Okay, I had to think about that one for a sec…

[timjedwards]

I’d try running a strong vacuum while wiggling the button…

[chelsea]

Oh no! Have you been able to remove the debris yet? If not, could you please post a photo of the button?

[Mckinzy]

@rpegg

Lift it upside down over your head and shake violently. Come on, you can do it.

Good Idea!
No, Not doing that…lol

[Mckinzy]

@chelsea

Oh no! Have you been able to remove the debris yet? If not, could you please post a photo of the button?

I think I got it…The button is working and I can’t see it anymore…

[chelsea]

Thanks for letting us know that you fixed your button! I am going to close this thread. Please start a new one if you have any more trouble. Or you can reach out to us at support@glowforge.com