(Seattle) Selling Glowforge Basic + many materials ($2,600)

Hi everyone, I’m moving and need to sell my glowforge. It’s a preorder basic model, which has been very lightly used (I’ve only needed to clean the lens once). Also included is a heap of laserable materials which I’ve picked up over time, from standard proofgrade stuff, to things I purchased from inventables, as well as some russian birch sheets I cut to size.

This is a great setup for someone who wants to get started with the laser and things to print with.

I’m located near Seattle. You can pick it up from me, or I can deliver between Olympia and Everett. The benefit of picking it up is that I can show you it prints successfully (is not stolen etc).

I will accept either cash or a cashier’s check that we go pick up from a bank together.

item size condition quantity retail price price line price
glowforge basic preorder, lightly used 1 $2,495 $2,250 $2,250
3mm Russian Birch 12x20 10 $1 $10
Proofgrade Standard Natural Leather 5x10 4 $11 $9 $36
Proofgrade Medium Hard Maple Hardwood 6x12 4 $7 $6 $24
1/8” Silver Mirrored Acrylic 8x8 Inventables 2 $6 $5 $10
1/8” Bamboo 12x12 Inventables 3 $9 $8 $24
1/8” Bamboo 12x12 Inventables, 25% Used 1 $9 $2 $2
Proofgrade Medium Draftboard 12x20 75% Used 1 $4 $0 $0
Proofgrade Maple Veneer 12x20 1 $11 $9 $9
Proofgrade Walnut Veneer 12x20 1 $16 $14 $14
Roll of Masking paper 12” x ~6ft 1 $15 $1 $1
Roll of Transfer Rite 582U 12” x ~25ft 1 $13 $5 $5
Proofgrade Medium Maple Plywood 12x20 75% Used 1 $16 $0 $0
Proofgrade Medium Walnut Plywood 12x20 25% Used 1 $16 $8 $8
Proofgrade Medium Clear Acrylic 12x20 75% Used 1 $9 $0 $0
Proofgrade Medium Maple Plywood 12x20 7 $16 $14 $98
Proofgrade Medium Cherry Plywood 12x20 3 $16 $14 $42
Proofgrade Medium Walnut Plywood 12x20 4 $16 $14 $56
Proofgrade Thick Draftboard 12x20 20% Used 1 $6 $1 $1
Proofgrade Thick Draftboard 12x20 2 $6 $5 $10
Total $2,600

This topic was automatically closed 32 days after the last reply. New replies are no longer allowed.