Solidworks Design Workflow?

Yay!

I find DXF to be more consistent than SVG due to the variants in the SVG translations between products. Super happy to see DXF!

1 Like

@dan - Really looking forward to DXF support, and if you see this first, please ignore my DXF question in another thread.

I used solidworks to design a lot of 3d objects. I originally planned to make them with a 3d printer, but with the probability of it warping, and the excruciatingly long time to make each of these objects, anything less than a liquid resin dlp or clip printer would be impossible to make these.

So I took to just drawing it out in inkscape, converting to dxf there, and had the pieces cut from sheet plexiglass, and reassembled with weld-on.

I do thank the solidworks tools, but i ended up scrapping it and using a 2d program instead. The results are pretty awesome www.sawatg.com

1 Like

I’ve done a little work with illustrator in the past, but I don’t like their new monthly pricing so I just need to take the time to learn inkscape.

Cool product!

You might benefit from the Finger Joint add-on feature in Onshape. I’m hoping to put it to good use for some wooden boxes I’d like to customize but it looks perfect for generating the tabs on your dungeon parts.

I have limited experience creating 2D patterns from Solidworks. The workflow that I used was very straight forward, from what I remember. I remember just selecting a a PLANAR face and then exporting it as a DXF using some tool in a drop-down menu. I or it was the other way around. Anyway, I then saved it to a folder. Those parts were sent out for water jet cutting. By the way, one important detail about curves/lines. The waterjet technician, who also run laser cutters, said that all splines should be converted to curves/arcs. So, at least with the 2 vendors I talked to, lines and arcs are best. If you can search Youtube, or just a web search, there should be short tutorials about how to convert 2D patterns/shapes into a DXF for laser cutting and water jet cutting.

Ive done the design part for all these plates and just now working on getting master molds for each.

One thing I learned about exporting a DXF from SolidWorks is that exporting a planar surface works better than exporting a sketch. …for some inexplicable reason.

In other words, if you were to sketch square plate with four bolt holes in it with the intention of exporting it to DXF, it’s a good idea to extrude it into a solid and then just select one of the surfaces to export it.

1 Like

So the structures in the pictures were prototypes? Looks like you’ve given this endeavor some serious thought and planning.

For most of the things I intend to build, the finished product will be modeled as an assembly in 3D and individual components or parts cut from DXF exports from faces of the modeled parts. Onshape makes that easy to do and it sounds like SW does as well.

Could you explain how to export a planar surface in Solidworks? I’ve never heard of that and I’ve been unable to find an example on google.

I hope this helps, I think its what you are asking for.

Save part as DXF.

It will ask you what you want to export. I usually do a view.

It will give you a preview that you can adjust and clean up before saving.

1 Like

I don’t have SolidWorks in front of me but, as I recall, once you’re saving a DXF you can basically just click on a planar surface and it’ll basically save it. I see in joe’s images above that there is a place where you can choose “Faces / loops / edges” as the type of export and I think there might be something like “use normals” in the “Views To Export” area.

So, how about that DXF support? I just tried to upload a DXF from Solidworks and I got an unhelpful error message. And the upload page doesn’t include any list of workable file formats, so I can’t know what to try next. Pretty crappy.

3 Likes

SVG is the go to format. The FAQ lists JPG, PNG, SVG, PDF, EPS.

1 Like

Sure, but Glowforge promised DXF support a long time ago and it isn’t here. So, what’s the hold-up? I don’t want to have to use a DXF to SVG shim.

2 Likes

Agreed, I’m much more comfortable in SolidWorks or Fusion360. I wish I didn’t have to convert to SVG.

2 Likes

There is a bunch of good info the the read over all. What I’ve been doing as suggested by users in that thread is make the part into a drawing>change any lines that need different operations to different colours>save as pdf>drop the pdf into GFUI. Sometimes I’ll bring the pdf into inkscape if I need some sort of graphic thing done as it works better there.

Sometimes it is easier to convert the line colours in inkscape then SW drawing interface .

1 Like

+1… DXF support would be greatly appreciated.