JINTEC
June 2, 2019, 12:42am
3
Hi Shishona. I just posted about my cooling system and found the link to your question. You could use similar setup to me but pump cold water from a large cooler filled with ice water.
here is my post.
Like many I have already run into the problem of the ambient room temperature being to hot to run my GF. As I am very short on space I decided to build a chiller right into my bench. I used two 120W Peltier plates mounted to large 4 tube heat-sinks that are cooled with 3 12v fans each. I used a cheap PC liquid cooling system as a chiller under the GF, mounting the RAD directly under the right side intake. I use a 120mm fan mounted on the GF exhaust to draw the cold air in when the unit is not r…
4 Likes