Need 20 sided dice pattern

[marmak3261]

Christmas Ornament

I’ve been dying to do stained glass work with the Glowforge. I have all sorts of different ideas for techniques combining wood and glass, but the very second thing had to be to prove that I could solder the wood with the glass without the wood burning up. (The very first thing was experimenting with cutting and engraving glass. Before you ask – none of the glass in this post was cut with the glowforge, but I do have another technique to try so I haven’t written it off just yet.) I put together …

It’s just 20 equal sided triangles.

Make a jig that will help you sand the edges to 21 degrees.

Plywood Icosahedron