Revolution ply and questions about fire

[rbtdanforth]

@anaxor

Would this work for any material

I modified his to include engraving…

Engrave and Cut 1/4" Mahogany tips?

This is the test I run on every new wood species and often on several to test what I want to actually use. but this first test runs the engraves at twice the number noted and then comes back and makes the cuts at the numbers noted and then cuts off the piece at two passes at 125 all full power. [evans%20tests] Watching closely while it is done allows me to put a wet cloth on after it cuts in the case where it starts to make charcoal,this is the Zebrawood piece after sanding it as the cut is de…

and it will work on any material, but you might want to have different ones with a different range for different types of material like cardboards that might catch fire in the range you would use for wood or acrylic that is almost all the same so the range would be very small.