… enter if you dare. shudder
7 Likes
Yes, one must go in prepared and in the right mental state to deal with that group. (Or maybe the wrong mental state is more appropriate? 
)
5 Likes
there’s lots of good stuff in that group, it’s just buried in a lot of other stuff that can be annoying at times. the structure of FB groups is even less friendly than the structure of discourse, tho.
5 Likes
FB. What’s FB? 
4 Likes
It really helps if you’re drunk.
2 Likes
Fantasy Baseball. People get really serious about it.
9 Likes
Nice! I’ll take the Dodgers in the World Series. Now THAT’S a fantasy!
1 Like
I’ve absolutely loved the cutout and have been using the machine with and without the cutout removed a lot this year.
6 Likes
it is after last night! go Nats! this is Howie do it! 
I’m planning on trying this this weekend if I can get the time. I’ll post pictures.
1 Like
I remember when my mom waited in line for tickets to the 1963 World Series. She had the option for the 4th game or the 5th game. Luckily she got tix for the 4th game!
1 Like
Well, I thought I would report in. I chickened out. I looked at in greater detail and decided against it. I think what I am going to do now is just buy a more professional model and sell my GF. I just can’t bring myself to cut it up.
Did you do it?
No. I couldn’t bring myself to do it. I ended up buying a professional level laser and am using it now.
2 Likes
Hi Matt - I’m thinking about cutting my bottom out. Any suggestions on cutting tools, measuring and…
Thanks -Preston
Matt did a great job, and was one of the first, I’m the latest kid on the block to do it.
Made on a FrankenForge 
Now with a Pass through!
1 Like
If you look earlier in the thread, there are photos and descriptions including the tools used. I still use the same size hole and configuration today, so it’s what I’d recommended. You could probably use a more rectangular hole if you’d like, but be sure leave enough of a lip to be able to replace the metal baseplate. It’s super nice to be able to put it back in and use your GF in stock mode when not lasering big stuff. Good luck!!
1 Like
Hey Matt thanks for the nice reply
I did finally found on the comments the long thread and all the all the updates thanks so much for sharing
1 Like
Hi Matt - I cut my bottom out Saturday afternoon. Did some sanding then fired it up - worked perfectly. Check out my IG @pmwoodstudio for some pics and action engraving some bowls I turned on my lathe.
Thanks again for sharing your experiences - gave me confidence to do mine!
-Preston
1 Like
That looks amazing! The red ceder turned up so well, and the laser treatment didn’t char. That is a super nice way to add a professional finish to the product. And now they can be nice and deep bowls. 