Defocusing the laser to "print" on fabric

That’s just “AWESOME”

Soooo cool! Does it weaken the fabric?

2 Likes

Another great idea. Thanks

1 Like

Doesn’t seem to, but I’ll have to do the laundry test just to make sure…:wink:

8 Likes

Ooh. Any idea how it reacts with dyed or printed areas?

1 Like

There’s this one too:

1 Like

Different fabrics will get different results. The tribal cat above was on 100% cotton…haven’t done poly blends except for fleece.
This was raster etched though.

14 Likes

Looks great. I can’t wait to try velvet. Hoping it gives a nice crushed velvet look. Would be great to engrave a name or pattern in it and cut to fit as a fancy box liner. Especially if the edges seal well when laser cut.

8 Likes

Thanks again. It is one of the things I was really hoping to do with the GF is custom t-shirts.

Oh, and KITTY!

2 Likes

I do screen printing as a hobby and I’m so glad you posted this. I know there has been some posting of laser on jeans, but tshirts are my thing!!! This type of thing might be my first thing I try. Here are some of my goofy designs;)
https://www.teepublic.com/user/splatty

6 Likes

For velvet you would have to get just enough to singe the top layer away without hitting the back fabric sort of like with the fleece. I considered doing that for my liners for the boxes but I had fleece in the office…lol

6 Likes

I do a lot of crewel embroidery and this looks perfect for transferring designs to fabric. This is very, very exciting! This would be so much easier and more accurate than tracing a design onto fabric, and a lot faster than screen-printing (which is overkill for only making one of something).

For example, here’s a recent project when I’d just started it, so you can see the lines marked on the fabric. (Note that this was a commercial kit so the fabric was already printed; so far I’ve never tried to draw my own designs this complicated.)

And in case anyone’s curious to see how it turned out, here it is a month later when I’d finished all the embroidery:

Custom designs would be so much better if I could use the GF to simply “print” the image onto the fabric before embroidering. :slight_smile:

23 Likes

Did it hurt when it burned through? :cold_sweat: Could be a neat tattoo.
Do you think that marking fabric will cause the fabric to weaken?

2 Likes

I didn’t read all of the posts before I posted. Sorry.

2 Likes

Very cool stuff! I’ll almost certainly be throwing my jeans into the Glowforge soon after I get it.

And I think I can add something somewhat relevant to this thread. At work we use a CO2 laser (I believe it’s a 30 watt laser) to mark date codes into our bottles.
Here’s an example:

The labels are blue (and sometimes other colors) on the front, and the back is white. The laser is able to vaporize a very thin layer on the front side revealing the white paper underneath. I’m not sure what it would take to replicate this on a standard cutter/engraver, but it would sure be fun to try! :smile:

5 Likes

Russ at SabarMultimedia again has a relevant video printing fabric, a tshirt.

Edit: Shoot. Posted before finishing original topic. Ok, a little repetition.

9 Likes

What happens when you laser HTV on the shirt? Would it adhere … Although I think they do make laserable HTV (Heat Transfer Vinyl ) for that (maybe?). Or is HTV really vinyl and the laser releases fumes that a heat press doesn’t… Just kind of thinking as Im typing away…

That looks like the screen display on my fish finder. :smile:

2 Likes

Yeah, wouldnt care to try with HTV. I doubt the laser could produce enough heat, long enough needed for adhering, without vaporizing it anyways.

1 Like