Engraving glass?

[dwardio]

I say go for it… It’s helpful to place a damp paper towel or a light coating of dishwashing soap on top of the glass, since you’re essentially pulverizing bits of the surface instead of burning, but I works great. Here’s a link to some early attempts I made with really cheap glass items:

Passes at Glass

A couple of firsts today… First attempt to engrave glass and first job without the crumb tray. The test article is a $2 glass bottle from Hobby Lobby. After measuring it, I propped it up on a piece of cardboard to get into focus range, and took a complete swag at the settings… [image] [image] One side I coated with a bit of dish soap, the other I left unprotected. Can’t really tell the difference. These were svg vector engraves. Next attempt will be raster engraves with 4 “colors.”