Engraving on olive wood settings?

[marmak3261]

Pen Barrel Engrave: Snapmarks and fixture

[IMG_0073] I was asked to engrave the name and date for the ordination of a priest. A colleague of mine who does wood turning (he’s even done the cowboy hat on the lathe. He’s good) asked me to engrave on some pen blanks he turned for a friend of his who is getting ordained. Easy enough project, but given the dimensions of the pen and the roundness of the object, it required some prep. He gave me three white oak barrel blanks and two olive wood barrel blanks. Should have been enough to get the…

I don’t have a record of settings. The last print I did of it is all clear of settings now.

You will just need to test. A lot of it is going to depend upon what kind of design you are engraving and how the grain is oriented and how much variation in the grain density. If you are engraving very fine details and need a higher LPI, that is going to call for different power and speed.

I generally go through a routine using the default SD engrave for walnut hardwood. Then I ease up or add more power.

Start lighter. You can always go over it again to go darker.