Here’s a simple guitar stand, inspired by this one from Make magazine. This is sized for a 3/4 guitar, and is cut from a single piece of 10x18 1/4 MDF.
Guitar Stand.svg.zip (1.2 KB)
Here’s a simple guitar stand, inspired by this one from Make magazine. This is sized for a 3/4 guitar, and is cut from a single piece of 10x18 1/4 MDF.
Guitar Stand.svg.zip (1.2 KB)
Great practical cut!
Thank you!
Very useful—thank you so much!
This is great! Thank you so much for sharing.
nice design!
I was just reading that article yesterday!! Thanks for the cut, I can finally take my guitars out of the closet and display them
That’s great, nice job!