Hardwood Available

Everything Else
1

I’ve got an extra collection of hardwoods that are perfect material for the glowforge:

These are all in prime shape with no blemishes. The boards are flat - not warped. They come pre-sanded.

Perfect thickness for the Glowforge:
(2x) 1/8" Walnut 12" wide 24" long
(2x) 1/8" Cherry 12" wide 24" long
(2x) 1/8" Hard Maple 12" wide 24" long
(2x) 1/8" Aspen 8" wide 24" long
(2x) 1/8" Red Cedar 8" wide 24" long
(2x) 1/8" Mahogany 12" wide 24" long
(2x) 1/8" Bloodwood 8" wide 24" long
(2x) 1/8" Padauk 8" wide 24" long
(2x) 1/8" Butternut 8" wide 24" long
(2x) 1/8" Basswood 8" wide 24" long

Thinner for use as inlays:
(1x) 1/16" Walnut 12" wide 24" long
(1x) 1/16" Cherry 12" wide 24" long
(1x) 1/16" Hard Maple 12" wide 24" long
(2x) 1/16" Butternut 6" wide 24" long
(2x) 1/16" Aspen 6" wide 24" long
(2x) 1/16" Red Cedar 6" wide 24" long
(2x) 1/16" Padauk 6" wide 24" long
(3x) 1/16" Bloodwood 4" wide 24" long
(2x) 1/16" Basswood 6" wide 24" long
(1x) 1/16" Mahogany 12" wide 24" long

Obviously, if you don’t have to pro model, you’ll have to cut these to narrower than 20".

I’d prefer to sell the entire set to one person to save on shipping fees. If you are interested, make me an offer. The original cost was $560 for the set (including shipping).

(PS: If this isn’t the right forum/venue for this listing let me know where to move it.)

2

PS - you can message me directly by clicking on my name.

3

I’m OK with this for now - in the future we may create a separate set of the forum for “for-sale” stuff.

1 Like
4

Nice collection.

5

Where is the collection?

6

Santa Clara, CA

7

Thanks, bit expensive to send to Australia and our border protection people would, probably, want to terrible things to the wood to make sure it didn’t contain stowaways.

8

I am in Menlo Park, Ca … Thinking about the thicker stock…

9

Yeah, I’m in San Jose, and really tempted…

10

:wink: Send me an offer at jasonwendling at gmail.com