Good evening. I am reaching out [hope not inappropriately] to see if you might be able to test a design and offer any suggestions. I have been designing with paper for 25 years and this is my first holiday creating my card on the glowforge.
I have created a 3D house and it seems to fit in but some are a bit look and some a bit tight. I have a second roof line that I am sure there is an easier way to make fit better.
I would be happy to pay you for your time, if you are interested.
It would use 1 piece of birch ply. 1/8”
Aldo I need to create some square openings and have been trying to get kerf right to fit with acrylic but either too tight or too loose. I have watched videos and read tips and clearly something is not working for my brain.
I have made some great projects on the GF but this one seems to be a bit of a challenge for me.
Thanks in advance!