How to avoid burn marks on 1/8" Birch (already used a masking tape)?

[evansd2]

You might also be overpowering the cut.

I’d suggest dialing in your settings.

New material cut test method

Don’t know what settings to use on a material? The only way to be sure is to test. Good news! You can effectively test on a thin strip on the edge of your material, it’s fast and easy. I use this shape to do so (SVG attached): [Material_test] Click here to download/save Or click here for the ZIP: Material_test.zip (3.3 KB) To use: Set the first operation to score (the numbers). You’ll use these to identify your cut pieces later. Set each of the curve shapes to a power/speed combo t…