How to remove masking tape from lots of little cuts

[deirdrebeth]

One strip:

Weeding masking with Gorilla Tape

or
The whole sheet:

Make Gorilla Tape Sheets -- Best way to remove lots of small bits of masking

I make puzzles – often with a delicate surface covered with masking tape that other methods of masking tape take either too long or destroy the finish to use (peel of each piece, stick pieces to Gorilla tape and peel off, soaking off, rubbing with magic eraser, not using at all…) The best way that I have found to quickly remove all the masking without damaging my final surface is to – while the project is still in the Glowforge – cut Gorilla tape and stick it on to cover the whole sheet of cut …

If your pieces are already apart, using a plastic razor as a scraper can also speed up the activity!