Wohoooo, Founder’s Ruler, here we come!
2 Likes
Awesomness!
2 Likes
Woohoo! I love new-delivery new-threads! Can’t wait to see what you can do.
12 Likes
Nice #1 in NM I venture, at least of those active in forum and on the glowmap.
Have fun with it!!!
2 Likes
Is the “no signature required” typical? This worries me… can UPS just leave it on my doorstep if I’m not home???
1 Like
I called my parents over and we had some dinner first. Talk about self control!
The girls got right to unpacking as soon as we said it was okay…
The sounds of angels singing as the box was opened…
Removing all the orange bits…
On the network and second print already. Oldest wanted a picture frame…
The must have founders ruler photo…
And the tolerance photo (very impressed)…
More to follow.
72 Likes
Congratulations! Very happy to see another successful unboxing!
5 Likes
That is so sweet! Thanks for sharing. That Microsoft ergo keyboard? looks pretty good. I didn’t know they had that style. I had an older one and it was a workhorse but sadly gave up the ghost some day and I just didn’t have the energy to troubleshoot it for the USB age.
Playful. Yes. It is the secret ingredient of the Glowforge!
4 Likes
Awesome! (They look like they are going to take over from you, pretty quickly!) 
8 Likes
Where did you come from? I thought you were gone. 
Last check for Weekly Highlights entries before shutting 'er down for now.
(I can read entries from the car, but trying to handle shifting images and links is just about impossible on that phone.) 
Let the party begin… 
9 Likes
The Founder’s Ruler photo with your duaghters made the GF worth all the money 
I hope y’all have a blast using it.
6 Likes
I still have not had a turn, but the kids are headed to bed now!
A few things I wanted to mention before I start to play.
It is wonderful! Such a lovely piece of hardware.
We took about 30min from the opening of the boxes to first print, but we were not in a hurry at all. We were oohing and ahhing at everything and inspecting as we went. The hardest part of the entire setup was the compression rings on the vent duct. My fingers were sweaty from the excitement and kept slipping open as I tried to slide it over the exhaust port.
Registration on the network was easy as one would expect. We were soon looking at the initial designs to print and mean daddy said we need to do the ruler first. Proofgrade in the tray and my youngest was honored with the first button press. We were all mesmerized as it cut our first test.
Everyone noticed the faint smell of smoke while it was cutting. Much like the smell of campfire on your clothes. Not objectionable but noticeable.
It was actually quieter than I expected. From the pre-release videos, I was getting a bit concerned about the noise. We were all standing around it watching and conversing without yelling. The sound outside is also less than I was expecting, and my exhaust run is very short. A pleasant surprise.
I am going to have to get used to some level of smoke residue and ash inside the unit. After just two prints (the deep engrave of the photo frame is what did it) there is a haze on the lid glass and tube. The Glowforge is so darn pretty, it pains me to see it.
Okay, now its my turn!
34 Likes
Yeah! I’ll keep an eye (ok, both eyes) on your work:grin:
2 Likes
Cool congrats.
When I first used the Pre-Release I noticed some smell during a cut. Was unable to get a perfect seal at either the GF vent or the window vent with those clamps. I used standard metal foil tape like that used on Heating/AC ducts at the two connections and the smell went completely away. Of course the residual smoke/smell will still enter the room once you lift the lid.
15 Likes
Hahaha–you staged that first photo just like that one scene near the end of Raiders Of The Lost Ark (on purpose?)
Congratulations and have fun!
7 Likes
Funny you mentioned that. I 1/2 thought about laying a coil of my ribbon LEDs in the box so it looked like light was pouring out as they opened it. No one had time for my nonsense…down to business!
8 Likes
That is a good pointer. I will carefully seal both ends. Have a fresh roll of foil tape on hand too!
3 Likes
Ooh, someone will have to take it to the next level with melting faces!
3 Likes
Congratulations!
. Looks like you had the best crew possible working on it 
1 Like