Material thickness .76 how to engrave when max is .5

[cindy.burns]

I have material that is .76 and I can only set it to .5. I do not want to cut just engrave. What do I need to do?

[eflyguy]

Remove the crumb tray. Prop it up.

[evansd2]

You need to remove the crumb tray.

There are a lot of threads about this, lets see if I can find one for you. (or you can beat me to it by searching the forum)

[evansd2]

Accurate engrave on items without crumb tray

Since @evansd2 hasn’t gotten here yet I’ll beat him to it – Previously: https://community.glowforge.com/search?q=how%20to%20cut%20without%20crumb%20tray LOTS of good info on how to do stuff without the crumb tray. Have fun!

Guide for engraving thick objects without crumb tray

Attached is a ‘laser guide’ that helps me align objects for engraving. It’s an approach others have described, and I hope that sharing my example is helpful. To make the guide, load the attached SVG and configure the outline to ‘cut’. This forum software does odd things to SVGs, but it should still work. It’s 10 in wide x 2 in tall (outside). If your crumb tray is a different height than mine, you might need to scale this slightly. And a photo of it in action. [IMG_1153%202] Instructions: …

Tutorial: How to cut without the Crumb Tray (Honeycomb)

Tutorial: How to cut objects too thick to have the honeycomb in place The GlowForge has a maximum material thickness it can cut through, but there is a maximum thickness you can even put on the honeycomb (crumb tray) even if you are surface engraving as the laser has a limited focus range of 0.01" - 0.4" *** above the surface of the honeycomb at the time of this tutorial. But let’s say you wanted to engrave something thicker that fits quite nicely inside the GlowForge but not with the crumb tray…

Cutting Without the Crumb Tray - The NO MATH Edition

There’s a great tutorial here on cutting without the crumb tray when you want to work with thicker material. If you want to know the numbers and theory behind it, go read that first, and then come back. Thank you, @henryhbk! This method uses the digital calipers you should already have, and the not-used-often-enough ZERO button. We’re going to go through the steps from the tutorial above, but without any math or writing down numbers. The first step is to find the height of your crumb tray’s su…