Material thickness I need help

[kittski]

There’s a picture in this link that might help you understand where your material needs to be.

Using "set focus" with material over .5" (No tray)

I’ve seen this question come up a few times recently and wanted folks to get the newest info. The new “set focus” feature has really changed things for working with thick material! If you have something over .5" to put in your GF there’s no longer a need for complicated math or tray calculations. All you HAVE to do is make sure your materiel reaches above the height of the tray and is the cutting range and the GF will do the rest. Here’s what to do… Remove the tray For material taller than 1…