Pro question

[marmak3261]

Passthrough Alignment Tutorial with Manual Indexing

I wanted to test some theories about pass-through use and to create a tutorial about how we can work around the camera alignment inaccuracies in the current state of the Glowforge software. To spoil the ending, here’s the final product: [final] I’ll be using Adobe Illustrator CC 22.0.1 (current version) primarily because I have a subscription via work. However, I am a total newbie with AI, so please feel free to point out other/better ways to do things if I end up doing them the hard way. I w…

This is one of the more robust examples.

Here is the winner!

Matching up cuts on the pass through slot - making a RC airplane

I am working on setting up a process for turning the airplane plans from FliteTest into something i can laser cut. I used to make these airplanes for my kids, but have run out of time lately to cut these out by hand. I decided to try and make the FT-MiniArrow. These are the plans they provide. the problem in a single wing side is bigger than the cut area of the glowforge. so I had to find a way to match up 2 separate cuts. First i converted the plans to something the glowforge can understand (…