Refining engravings

[evansd2]

Also previously, and maybe relevant:

How to remove masking from 423 parts at once

I’ve mentioned my tape sandwich method before: Mask your material. Cut. Apply blue painters tape to the entire surface before you remove the material. Remove taped-up piece, all the cut parts should come with it. Flip and tape the other side. Now you have a tape sandwich. [image] Press the tape down thoroughly like you’re applying masking. Peel the blue tape and masking off in a sheet. [image] You’ll miss a couple pieces, but that’s ok. It’s like 98-99% effective, which is good enoug…