I was commissioned to do some artwork, and I wanted to share some of the fun things you can do with the GF. (Please keep in mind these are still a work progress and not by any means actually finished I still have a LOT of work to do on this)
The piece will be dual sided and displayed in the middle of a room. you will be able to see through the rose window and it will have a concaved look to the portion presenting the window.
I’ll keep updating this thread with progress too.
Dimensions are 10.5" tall, 10" wide, and it should be about ~7" thick when it’s done.
Material is all paper products: Poster Board, Matting, and Colored Paper stock.
Here is the prototype for the piece and was just signed off to continue.
I’m slowly building out the final version of the piece (Left is the prototype and the right is the final version.
Here is another where the one on the right is the prototype and the one on the left is the final version.
Both colors finished
Here are the two pieces all glued up and finished per the clients request.
My working area
Started cutting out and applying some of the Scaling for the background.
This is the final frame for one side of the piece. I still have to add the additional detailing work to the piece, but it’s finally got some real depth.
Update 12/20/22:
Was sick and didn’t have the brain power or energy to reengineer a few needed pieces, but finally got back to it.
Started Gold Leafing some of the layers and sections
Started working on the frame some more:
Got the final approval and signoff on the piece:
Now to build it with the minor edits, and assemble everything permanently and do 2 sides since this is a free standing object.
COMPLETED
