@mad_macs @Tom_A It has been mentioned on every other topic with this issue that I’ve seen (to be fair, I mostly skip over these topics, but have looked at several), but there seems to be a bug that if you start a new print within about a minute of finishing an old one it hangs like this. Apparently the print finishes, the fan turns off, then in ~30 seconds the button flashes again. This button flash is when you can actually start a print. The software will let you choose to start another print in this time frame, but will hang. When I had this issue, I searched the forum and found an answer quickly and have not had the problem again.
3 Likes