Used the Cermark LMM6000 as recommended, light even coats and then let them dry fully (I did 30mins).
I removed the crumb tray and used one 1" thick melomine piece of wood and one 3/4" thick (both are pretty squared.
I set the material to the Iphone7 silver with a speed of 600 and a power of 100 as you can see in the photo.
Most of the flasks were 7.5 mins on average with the longest being at 7.59 mins. So all in all pretty quick prints. But after the 35th one… I was over it! Lol.
Once the print was finished I removed the masking tape, rinsed off the Cermark and dried with paper towels and finished them off with a quick buffing using a really soft micro fiber cloth.