Success With Backing Draftboard With Magnet Material?

[cynd11]

I have cut the thin magnet sheet. Just make sure it doesn’t have PVC in it. You will have to do some testing to determine best conditions for the Draftboard/magnet combo.

Some magnet info

I’ve been wanting to make some fridge magnets of my cats, for the cat shelter to sell along with my cards. Turns out they cut just fine in the GF. The magnet sheet I used was this stuff. My cutting conditions were: 2 passes of Speed 250, Power 100, focus height 0.026". The second pass gives you lots of fun sparks! Here’s the interesting part: I was afraid that the heat would demagnetize this fairly weak material. Turns out that doesn’t seem to be the case. But I did a little research an…