I thought that would be easy to answer, but I can’t find my note book right now! But I can tell you I first used the “thin leather” setting, and it wasn’t too much different from what I used for the wood card stock, which I could find: 1000 speed & 20 power for etching and 450/60 for cutting. I think I may have used 40 power for the metallic card stock etching–but it did vary slightly between the colors I used to expose the core fully. I recommend erring on side of starting low and work your way up on the power until you get the look you want, since what you need could vary by brand and the weight/thickness of the stock, of course.
1 Like