I saw your lovely sign yesterday and that you’d said it was time-consuming to line up the lettering on the plank. Like was mentioned above, you can use the piece that you cut the lettering from as a template to line eveything up. In my design, I add a thin frame around the name, and that frame really comes in handy.
First, glue that frame into place. Then, you can take the piece that you cut the design from, lay it down over your sign plank on the frame, and then proceed to glue each letter into place using the template as your guide! No other work needed! Be sure to check every so often for excess glue on your sign by lifting off the template!
Lovely pallet wood that you used for your project.
LastnameSign4|666x499
1 Like