What is the settings for engraving on punch tin

[evansd2]

@primal_healer

though about doing the masking thing

Someone did that. Hmm…

here we go:

Paint Resist on Steel - Lessons Learned

My partner was recently up for a big award in our LARP group, and as a fan of Brandon Sanderson had commented that it would be cool to see the physical award in steel. [79755302_10162527201885263_754215197983375360_o] Knowing that the GF couldn’t etch steel without using CerMark or similar, I decided that I would etch a resist with the GF and then use acid to do the etching. I leaned really heavily on Annie Sullivan’s tutorial as it gave me an excellent starting point. My desired end result w…

And another:

Using spray paint as a resist for etching metal

There have been some great posts here about etching metal, so I tried it out. Finally had the time to write up the process on my blog. [glowforge-etched-brass] Note: copper is reflective! See @martin.anderson’s note below.

Maybe more out there if you dig deep.