Woodworker's Push Stick

Free Laser Designs
1

Push Stick to use on Table Saws

GlowForge Pro Settings

Use Proof-Grade Setting for
Thick Maple Plywood and Change the Speed and Power

1/4" Birch 2- Outer-Layers (Home Depot)
125 Speed
Full Power

Middle Layer is Medium Draftboard- Use Default Settings
ProofGrade Draftboard

Used Gorilla Glue to glue all 3 Layers together

Push Stick
Push Stick3024×4032 2.92 MB

Push-Stick

36 Likes
2

I’ve made so many push sticks and keep your hands back devices but never on the glowy. I will remember this is here for that day. I need a push stick, and all I have is thinner stock.

4 Likes
3

You could cut one out and use as a Template on a piece of 1x6 to cut with a jig saw or a scroll saw

4

Thanks for sharing, and Welcome to the funhouse!

1 Like
5

Thanks for the share. Nice practical cut.

6

A good practical cut

7

Thank you

8

or just glue some thinner stock together. it’s a pushstick, don’t gotta be purdy. :slight_smile:

3 Likes
9

True but in some circles push sticks are like start button enhancements are here.

3 Likes
10

Great share! I love practical cuts! Welcome to the community!

2 Likes