Alignment with different steps

[evansd2]

Post I referred to:

Glowforge scoring/cutting inconsistent

I’ve been seeing some issues with complex vector scoring [not engraving], resulting in inconsistent results. It seems that my machine is slipping or skipping steps, especially at higher speeds. I ran two of the same engrave at different settings, first at 350 speed, then at 200 speed (thinking that the higher speed may have been the issue), and finally at 100 speed. It was only at 100 speed that I saw proper alignment, is this to be expected? Here’s the 350 speed: [IMG_1435] and the 200 spe…