Craziest/most interesting non-proofgrade object/material that you’ve cut/engraved/scored on your Glowforge

[shop]

a guitar (well, one of many, but this was the best one).

Paisley Guitar

This one took me a while to figure out how i wanted to do it, since I couldn’t engrave the whole thing in one piece (it’s larger than the engravable area) and i didn’t want to try to line it up perfectly and either (a) trash the body if i messed it up and (b) waste an hour + engrave if step 2 wasn’t perfect. So I inset from the edges/hardware/pickguard and even though most of it is one large engrave (with a smaller engrave on the return (the part above the neck)), I was able to rotate the guita…