Dozens of design files missing from library

[rbtdanforth]

@eflyguy

but I don’t have the settings which were painstakingly refined and then applied to the design

By keeping a set of these for every sort of materials you use you can have a good permanent record to refer to that will at least provide the settings for very little use of materials,

Engrave and Cut 1/4" Mahogany tips?

This is the test I run on every new wood species and often on several to test what I want to actually use. but this first test runs the engraves at twice the number noted and then comes back and makes the cuts at the numbers noted and then cuts off the piece at two passes at 125 all full power. [evans%20tests] Watching closely while it is done allows me to put a wet cloth on after it cuts in the case where it starts to make charcoal,this is the Zebrawood piece after sanding it as the cut is de…