Edge Lit question

[evansd2]

Something like this?

Crosshatching engrave alternative

So I thought I’d try some crosshatching experiments. First manually in the GF ui, using the engrave functionality. I made a semicircle to engrave inside a hexagon. I then engraved at 35 lpi, cut the hex, lifted it out, and rotated it manually by 60 degrees. Ran the engrave again. Here it is after 2 steps: [IMG_6382] And here after 3: [IMG_6383] And detail: [IMG_6384] It was cool but fiddly and I don’t know how useful. Ages ago I tried manually making fill patterns, it was tedious …