Engraving settings basic

[evansd2]

Using Glue to Mask and Paint Engraves

So this is situational but I used wood glue to mask some plastic pieces prior to engraving. Then infill with paint, let it dry, then remove the glue and excess paint. I first tried to do it with tape but it always bled through – glue made a perfect seal, no paint could sneak under. [image] Pics will make it more clear… Old keys on the bottom, new ones on top. [image] The problem. The old keys have printing on the front for media functions. [image] New keys F7-F12 are missing the pr…

For more details.