jreif1:
Kerf set at .008
If you make a small cut in a corner of the wood you are using you can measure it and get the real kerf. If you are designing without kerf you can do this…
If you want it that close reversing it like that is needed. If you want to know the kerf on a single piece of material today. Cut a small bit and measure it then set kerf and cut your design.
If you want to set a kerf on the fly in Inkscape you can set your cut line to the desired kerf size, then in Fill and Stroke (Shft+Ctrl_F) set the stroke style to that number and under Path pick Stroke to Path (Ctrl+Alt+C) and you will have two lines and Break Apart in the same dropdown will make them sep…