Good day.
Machine is running great, but I may have noticed something missing.
2 screws from the plate that holds the rubber piece over the passthrough. I didn’t toss the machine around when setting up, so I don’t know if they are around inside, or never shipped. This is the front door.
Not looking to send the machine back for this, and the barrier is working. Just a heads up.
Anyone else have this missing?
Those are for the passthrough shields, when they ship.
Oh , I thought it attached differently. My bad. Please close ticket.
Whew!
That was my thought too.
If that is not the case, then i am missing two screws as well.
Wouldn’t be the first time I’ve been told that.
I noticed a screw there (securing the metal face of the door) not completely seated, so I took a screwdriver to them and found them all looser than I would have expected.
Thanks @jbmanning5, that’s correct!
