Pre Release: Beer/Cider 4 Pack

Made on a Glowforge
21

Where do you buy yours?

2 Likes
22

Picked mine up local at GSG. R-tape 4075 high tack translucent transfer tape.

7 Likes
23

Ahhhh! Thanks. Maybe I can find an online supplier.

(Going to finish this roll first - but it really has limited effectiveness.)

1 Like
24

Thats sharp! Logo looks great. Really clean.

2 Likes
25

http://www.fellers.com

Oh, SignWarehouse.com has it too. :slight_smile: https://www.signwarehouse.com/c/rtape-aplitape-4075-transfer-tape-high-tack

7 Likes
26

Thanks! I guess I just ordered the wrong one. (Bummer.) :slight_smile:

1 Like
27

really nice work, dude. i also do homebrew, and iā€™ve been thinking of six-pack designs for some time, now, haha

1 Like
28

12 sheets at that size is about 1 full sheet of 5x5 Baltic(typically comes as 5x5 as opposed to a 4x8). Which a full sheet even up here in Canuckistan with our dollar is about 20$. So your paying a hefty premium for pre cut stuff.

Is it a dead 12" or 11 7/8" or so. If itā€™s a hair under 12" then they are probably just cross cutting 12" off the bottom of the sheet then ripping the rest. Is two pieces of your 12 pack cross grain?

5 Likes
29

Thats what woodworkers source doesā€¦[quote=ā€œjordanloshinsky, post:28, topic:7703ā€]
12 sheets at that size is about 1 full sheet of 5x5 Baltic
[/quote]

But theirs is only BB/BB and any local stuff is no betterā€¦that I can find so farā€¦

3 Likes
30

Oh man, that sounds like a dream farm! When I retireā€¦

2 Likes
31

Nice project! Nice farm! Rescued from a dorm! Oh myā€¦poor pigs.

2 Likes
32

Great design! love the the bottom tabs in through the sides! Would hate to loose the bottom!

1 Like
33

Yeah, but John is the CIO of a multibillion dollar hospital system, and is active on standards committees around the world. Not a big sleeperā€¦

2 Likes
34

By the way, this whole project took about 2.5 hours from start to finish (glue up took overnight to dry of course) including CAD time/laser time. Sort of amazing. If we do these in bulk need to have an optimum sheet usage to make it quicker.

Just ordered it to give the high-tack a try. If that works it would be awesome.

7 Likes
35

Did you get a squeegee too? Those are useful in getting flat onto the surfaceā€¦

3 Likes
36

Cool project. I have a few friend who have a home brew setup that iā€™m sure would love something like this.
And thanks for the link for the plywood, iā€™ll be ordering some tonight. :slight_smile:

37

Once I have debugged, I will post the files.

5 Likes
38

And donā€™t forget the files for those acrylic bed positioners! Would be very handyā€¦:wink:

3 Likes
39

yeah, they are still very much in debugging modeā€¦

2 Likes
40

Sweet 4-pack holder, nice job! I was just ordering those birch plywood bundles for the new makerspace Iā€™m building out! Great minds.

1 Like