thanks!!!
Can you take a photo so we can see the color you are seeing? Red is not supposed to be a color, that I know of, that anyone should be seeing.
It is really red.
That is odd. I assumed it was orange.
Nope red for sure
Thanks I will try that tomorrow because it’s midnight here. Will post again tomorrow.
Found the problem !!! Cable got disconnected from the laser head.
How is this possible? See my previous problems/ statements @dan about the marvel calendar where the design engraving lost alignment during print. As a stated that I foresee a problem with the cable hitting the last screw. I think this is why the cable got disconnected… in my opinion there should be no screws sticking out. This could be solved by sticking a plate over the screws or sincking the screw’s in the metal. Please come up with a solution so this will not happen in the future! Also found that the cable is not aligned whit in the black bar it is in is this normal?
2 Likes
Spell check didn’t help you in that sentence. You might mean that the ribbon is not laying aligned with the black plate that runs the length of the gantry? Mine does lay straight. Or you could mean that the connector is misaligned? It should click in place. If not check that the pins are still good.
I never disconnect the ribbon cable. My ribbon has enough slack to clean the head with the ribbon still attached.
2 Likes
Probably wasn’t secured in the first place. Easy enough to put the cable in without it latching.
Not sure what you mean. Post pictures.
Did you tighten the screws? (You can do that.)
sorry again for my bad english i am dutch:see_no_evil: and thanks for the reply have no spelling corection. and i mean what you sad
connector does have a litle bit of lousnes but does click in position. pins are ok i am printing now.
i aslo do not disconnect when i clean.
so conlusion ribbon should be alligned!!!
1 Like
they are, and machine is not that old ….
Can you take pictures of the badly aligned white cable in the black bar and post it for the support team to look at?
To post the picture here, drag and drop it onto it’s own line in a reply post.
1 Like
Most Americans try to learn another language at some point and fail miserably. Your english is fine.
7 Likes
Pictures would really help. Glad you got it working!
No apologies for your English, I couldn’t begin to speak, or spell yours.
I cringe when I hear someone say “Learn to speak English!”
When you hear someone speak with an accent, it means they speak at least one more language than you do.
2 Likes
finale have the picture converted to pdf because gf does not allow iPhone picture to upload. and now says the upload sise is to big. grrr!
yesss got it!! IMG_1374%5B3458%5D|375x500
i hope!!
2 Likes
I don’t see the screw you mentioned.
this picture is so you can see the cable is not allinged and moves inwort
Would you please open the front drop down door and take a picture from this angle?
(To post the picture, type a reply, then hit ENTER twice and drag the picture onto a new line in the post.)
1 Like