Recommendation for where to start learning how to design

[evansd2]

You’ll like these:

Variations of finger joints

Finger joints are practical and boring. Rather than fighting against them as a constraint, I tried to imagine them as design elements. I only had one general rule: Anything added should actually be part of the joint. This is about finger joints, not inlay projects. This is what I came up with. The techniques came in a few varieties: Obscured: I tried to implement them in a way that would minimize or distract from the inherent blockiness. Highlighted: Run toward the light. Incorporate …

Planar butt jointing techniques

THERE ARE PICTURES DOWN BELOW! Don’t run away because of all the dumb text I’ve recently completed a study of various inlay-esque plane jointing techniques, where two pieces of wood butt up against each other edge-to-edge in the same plane. As with my finger joint roundup, I had a few rules I set up at first to keep the scope manageable. No more than two species of wood involved. No “islands”. All wood needed to be firmly attached to its “side” of the joint Light, constant kerf cor…