Thick Acrylic - multi-pass vs single pass - opinions

[marmak3261]

I knew there was a good illustration of cuts. Forgot to ask if you have a Pro or Basic. I didn’t search for the numerals.

1/2" Cast Acrylic

I had a need to made some parts out of 1/2" clear cast acrylic. I bought the material from Inventables using my GlowCredit, and after a few stabs in the dark, wound up with this mess: [MVIMG_20171031_202744] And, the first fire I had to put out. It was time for something more methodical. I give you: [Untitled-1] These are single line, 1/2" in length cuts at various focal depths and cutting speeds. All are at 100% Basic Power. .433" at 100 GlowySpeed gave fairly consistent cuts completel…