I work with Wedi Board for stained glass. I was wondering if anyone has cut wedi board and if it works?
I’m not even sure what that is - but (per previous posts) @Kusmeroglu (https://community.glowforge.com/u/kusmeroglu) works with stained glass so maybe they can help
Also doing a search for “stained glass” might lead you to other people who work in the medium
Glancing at their website, it looks like wedi board is a polystyrene foam core with fiberglass on both sides.
both polystyrene foam and fiberglass are on the “Never Cut these materials” list at http://atxhackerspace.org/wiki/Laser_Cutter_Materials :
Fiberglass> Emits fumes> It’s a mix of two materials that cant’ be cut. Glass (etch, no cut) and epoxy resin (fumes)
PolyStyrene Foam> Catches fire> It catches fire quickly, burns rapidly, it melts, and only thin pieces cut. This is the #1 material that causes laser fires!!!
based on that, I would guess probably not gonna work out well in the GF. Proceed at your own risk.
Thank you!
I haven’t seen wedi board before, but I did recently find this post that I love: Acrylic & Wood Inlay Flowers Using Illustrator
This topic was automatically closed 32 days after the last reply. New replies are no longer allowed.