Yarn Ball Dangle Holder - design no longer available

__This design is no longer available from me. It was taken by someone and listed for sale on Etsy. Then they tried to pull me into their drama and wanted me to solve their problems __

I was not able to delete this whole thread. It was kindly moved to Everything Else for me.

As with all designs in the Free Laser Design Category, neither the designs, nor what you make from them can be shared outside of this forum or used to make you money. About the Free Laser Designs category - Free Laser Designs - Glowforge Owners Forum

The one sided walnut from Home Depot.
https://www.homedepot.com/p/Columbia-Forest-Products-5-32-in-x-1-ft-x-1-ft-7-in-PureBond-Walnut-Plywood-Project-Panel-10-Pack-5107/312981163

32 Likes

Thanks for the share! I have a couple friends who do a lot of crocheting. I havenā€™t crocheted in years myself, although I still have all of my hooks. But how does the ball go on there? Theyā€™re usually wound pretty tight. Or does the skein of yarn go on it without winding it into a ball?

And do you ever wonder why all the time is spent changing it from a skein to a ball anyway? I know the ball makes it easier to have it unwind as you use it, while the skein makes it easier to store. But the hassle! I remember well holding my hands out as my mom would wind the yarn around them from the skein, and then rewind it yet again into a ball, which invariably would get dropped and roll across the floor! Oh, the memories!! :smiling_face_with_tear:

16 Likes

She is using the crochet balls with cardboard tubes in them, so those are easy on, easy off. we experimented with shoving a longer shaft through a commercial skein, which worked, but she wanted to stick with this size.
My ball winder is the size of a toilet paper tube, so one of those goes on before I wind a skein into a ball.
I held skeins for my grandmother. You are correct. this wonā€™t work with a hand wound ball with no center core. An early test model had a pointed tip instead of a round one, but that didnā€™t work well to go through a compact ball, so the pointy object was removed.

11 Likes

If you doubled that vertical piece you could have the walnut on both sides (after doubling the width of the hole of course) a square is easier to spin than a rectangle as well :slightly_smiling_face:.

5 Likes

Very cool! With the rounded end, does that mean you sit it in a bowl? I recently crocheted a couple of dishcloths after years of not. Hope to do so again soon.

Thank you for sharing!

6 Likes

I started making my own t-shirt yarn to weave rugs with (also works great for tying garden plants!), and use toilet paper and paper towel tubes to wind them. Never would have thought of winding regular yarn on them!

7 Likes

It spins ok on the rounded bottom, but you probably donā€™t want to rely on it. Just sitting it in a bowl might work really well. It probably wonā€™t bounce around as much as a loose ball.

6 Likes

I learned the other day at my spinning guild meeting that when you spin yarn, you want knitting yarn to be spun one way (drop spindle clockwise I think) and crochet yarn the other way. As you crochet you will slightly untwist yarn made for knitting.

6 Likes

I taught a friend of mine to spin wool and silk on a treadle spinning wheel. She does exactly as you say for her yarns: crochet (S-twist, Z-ply) vs knit/weave (Z-twist, S-ply).

And thank you for the wonderful design! So practical.

10 Likes

Nice practical share. Thanks!

7 Likes

So cool thanks for the share.

Great thread also

6 Likes

@Helene and @kelley1 - that is so interesting! Iā€™d never heard about the difference in the way yarns were twisted. And itā€™s been a while since Iā€™ve even bought any. Do they specify whether they should be used for crochet or knitting? Iā€™ve watched one gal do some spinning once at a craft show. Iā€™ve always thought it was fascinating.

6 Likes

Itā€™s been years since Iā€™ve bought commercial personal-use yarns. I know there are cottons called ā€œcrochet cottonā€, and it may be that their twist is opposite that of knitting yarns. Some yarns do market themselves for one or the other.

My guess is that modern commercial yarns (acrylic, polyester and nylon with a bit of wool or cotton thrown in) are designed for any mode; I havenā€™t really paid attention though. There are symbols on the wrapper that give you an idea as to the gauge with certain size needles. [Have your glasses handy.]

I was a ā€˜sometimesā€™ crochetist, so I didnā€™t know about the twist directions. I was taught to spin by a spinner who was also a weaver/knitter. Of course, I twist and ply in the same directions as her.

6 Likes

They told me at my guild meeting that some yarns do specifiy if they are for knit or crochet.
Yarns will (sometimes) have little symbols that say what size it is and how to wash it and what size needles to use. Sometimes those needles are either pictured as knitting needles or crochet hooks.
I donā€™t buy yarn often and I am going off of memoryā€¦

6 Likes

Thanks gals!

3 Likes

What size should this be? When I bring the file into my Silhouette software, it is tiny. Thank your for the file. I plan on using for my twine.

2 Likes

The file is set up to be used on the Glowforge - the design was created in a document that was 11x19 (or whatever the exact size is - it is past my bedtime!) and it should open in the Glowforge the correct size. The round piece is about 4 or 5 inches across. You could resize it however you like, the only thing to watch out for is the thickness of your wood and the width of the rectangular hole in the middle.

4 Likes

Helene,
Thank you so much for the information. I usually open files in my Silhouette software first, before using in my Glowforge. I think it is just a habit that I have gotten into. I will open it directly into the GF. Again, thank you.

4 Likes

Thanks so much for sharing!

4 Likes

Helene,

This is my first time using the community forum so Iā€™m sure Iā€™m missing something, but is there a link to access the free design youā€™re sharing? Iā€™m only seeing the link you shared to the home depot products you use. Thank you for your time and help!

4 Likes