11.25 inch hexagon

[deirdrebeth]

This might help you understand what you’re seeing:

Scanning / software weirdness

A semi-easy alternative… The problem that we get is that once the Focusing happens, the top 3/4 inch or so of the board can no longer be seen in the camera view …there is an overlay that prevents us from seeing it. (Size goes down to the 11.47" that the head can reach, measured from the front of the board, at the exact correct start of the cuttable area.) So when you try to center visually on the whole board showing, if you don’t realize that the top approximate 3/4" is hidden from view, you…

Yes, with a pass-through you can do 19.5" x infinity.