Google Sheet for settings?

[hadahoward99]

Thanks for the advice. I ended up using my old Lauan test and it was nearly spot on. I created a post on Beyond the Manual in case you want to see how it turned out. I ended up with 145/FULL.

RevolutionPly settings

I was inspired to try a local big-box for materials and came across RevolutionPly at Lowes. It is sold as an underlayment, but it is advertised as being stainable so I took a chance. If you want an example of a finished project, check out this EverythingElse post. The material is sold a 0.197-in x 4ft x 8ft sheets around $22. My calipers show this at 0.1811in ( 4.6 mm) instead, but pretty close. It has 3 core ply with 2 veneer exterior layers. I have found no voids so far after cutting do…